Microwave Muffle Furnace

Product appearance
		Grain and oil quality inspection center
Control program and touch screen
Furnace chamber

Product purpose:

The CY-AS1200C-M microwave ashing furnace is a revolutionary development in the ashing field. It realizes a fast and clean ashing process, changing from the "several hours" of the traditional muffle furnace to "several minutes", greatly improving work efficiency.

Applicable to the analysis fields of organic matter, food, pharmaceuticals, polymers, oil, feed, plastics, coal quality, etc.

Features:

● Direct ashing without carbonization, omitting the carbonization process of evaporating moisture and burning to remove organic matter before putting the sample into the muffle furnace

●International brand control system, stable and reliable

●Industrial-grade microwave system, stable use and long life, integrated design, compact and lightweight

●The temperature of the material is fast and the ashing time is short. Most samples can be completely ashed within 10 minutes, while the ordinary muffle furnace takes several hours or even dozens of hours.

●Large amount of ashing, lightweight structure of vacuum forming insulation fiber, energy saving and high efficiency

●Open the door and power off, and the power will be delayed to ensure safety

●Equipped with a special crucible, rapid heating speed without cracking

●7-inch large touch screen operation, simple and convenient

●Exhaust device to enhance air convection and speed up ashing

●Non-contact heating, ashing without deviation

●According to customer needs, 4 sets of processes are pre-stored, which can be directly called and modified at any time

Product Safety:

1. Microwave leakage ≤0.05mw/cm² (lower than the average leakage value of mobile phones)

2. Alarm: equipment over temperature, furnace door not closed tightly, magnetron overheating, microwave system failure

Technical parameters:

1. Equipment structure: desktop (placed on the test bench)

2. Voltage: 220V±10V 50Hz

3. Rated power: 4.5KW

4. Microwave power: 3KW

5. Microwave output power: 400-2900W continuous non-pulse microwave emission, continuous automatic adjustment

6. Microwave frequency: 2450Mhz

7. Usual operation temperature: ≤1000℃ (Max Temperature 1200℃)

8. Heating space: 225×225×100mm

9. Heating speed: ≤100℃/min

10. Temperature control accuracy: ±1℃

11. Control program: manual, constant temperature, automatic control 3 temperature control methods, with data storage, export experimental data; real-time curve display, multi-segment process parameters can be set, 4 sets of processes are pre-stored, which can be directly called and modified at any time

12. Control method: 7-inch touch screen + PLC (international brand)

13. Microwave leakage: ≤0.05mw/cm²

14. Alarm: equipment over temperature, furnace door not closed tightly, magnetron overheating, microwave system failure

15. Equipment water requirements: water flow ≥4L/min, water temperature ≤40℃

16. Built-in exhaust air volume: ≤3m3/min

17. Equipment size: ≤650×600×700mm (length×width×height)

18. Equipment weight: 80kg

Configuration:

1. Microwave cavity: 1 set of 304 stainless steel furnace body, 1 set of carbon steel sprayed protective cover

2. Microwave source system: 1 set of industrial-grade water-cooled microwave heating system

3. Insulation system: 1 set of insulation module, 1 set of special microwave bearing plate, 1 set of dust-proof isolation kit (note: the crucible is equipped by the user, or optional: quartz crucible or CEM quartz fiber crucible, the price is calculated separately)

4. Control system: 1 piece of imported Mitsubishi brand PLC, 1 piece of 7-inch Siemens touch screen

5. Others: 1 piece of microwave shielding device, 1 piece of exhaust fan, 1 set of exhaust duct, 1 set of operating gloves, 1 set of crucible tongs

Vulnerable products (consumables):

1. Insulation module

2. Microwave special bearing plate

3. Dust isolation kit