Product ID： LGJ-15E, LGJ-22E, LGJ-30E
1. Structural design that complies with biopharmaceutical standards. The inner fillet, surface roughness, shelf smoothness and cavity internal materials of the freeze-dried cavity meet the pharmaceutical standards.
2. The control system is stable and reliable. Adopt PLC programmable logic control system and 7-inch color touch screen, the system runs more stable and reliable, human-computer interaction friendly.
3. Display and record vacuum degree, cold trap temperature, material temperature and shelf temperature in real time and form freeze-drying curve, store data every minute, continuously record material and equipment status data, support data offline browsing, analysis, printing and storage, and configure USB communication interface.
4. Freeze-drying process can be controlled: Freeze-drying process is automatically controlled by programmable program. Semi-automatic or full-automatic control can be switched in real time to realize the whole process parameter control of freeze-drying process.
5. Water capture efficiency and capacity: stainless steel inner - wound water capture device, water vapor channel unobstructed, material freeze-drying consistency is good
6. Intermediate medium circulation technology. Shelf gradient temperature control, plate temperature uniformity, strong controllability, flat plate, good heat and cold conduction
7. Double cascade refrigeration technology. The original imported fully enclosed compressor unit and the international standard green environmental protection cold coal are adopted to achieve rapid refrigeration, low cold trap temperature and strong water capture capacity.
8. With the compressor secondary start delay protection and pressure overload protection system.
9. The drying chamber adopts high-pressure, low-temperature-resistant aerospace acrylic material with high transparent door to observe the whole process of material freeze-drying change.
10. The rest plate silicone oil refrigeration and heating, with temperature, speed adjustable, controllable, to achieve in-situ pre-freezing and sublimation function.
11. Configure the interface of the negative pressure aeration system. Built-in 0.2μm filter element to reduce secondary pollution of the sample, backfilling with nitrogen or inert gas
12. Cold trap has automatic frost function.
13. Optional clean room installation, and provide clean room installation solutions.
14. Optional vacuum adjustment function to realize freeze-drying process exploration.
15. Optional eutectic point online test function to better optimize the sample sublimation process;
16. Optional wireless remote real-time monitoring and chart recording of the computer.
※ Standard cold trap temperature (no-load): ≤-80℃ (ambient temperature ≤30℃)
※ Ultimate Cold Trap Temperature (no-load): ≤-83℃ (ambient temperature ≤25℃)
※ Maximum water catch: 7 Kg
※ Standard vacuum (no load): ≤10 Pa
※ Ultimate vacuum: 1 Pa
※Material tray, freeze-dried quantity:
LGJ-15E: 2+1 shelf, layer spacing 143mm, freeze-dried area 0.15m2; 638pcs of Φ16mm Vials or 336 pcs of Φ22mm Vials can be loaded
LGJ-22E：3+1 shelf, layer spacing 90 mm, freeze-dried area 0.22m2; 927 pcs of Φ16mm Vials or 504 pcs of Φ22mm Vials can be loaded
LGJ-30E：4+1 shelf, layer spacing 65 mm, freeze-dried area 0.3m2; 1276 pcs of Φ16mm Vials or 672 pcs of Φ22mm Vials can be loaded
※Shelf size (length × width): 312mm × 242mm
※Shelf temperature control range: -50 °C ~ +50 °C, temperature control accuracy: ± 1 ° C
※Host dimensions (length × width × height): 650mm × 700mm × 1288mm
※Machine power: 3300W
※Applicable power supply: AC380V 50Hz
※Machine weight: 250Kg
※Applicable environment: ambient temperature ≤ 30 ° C
※The main configuration: one host, one vacuum pump.
Vacuum degree adjustment, imported vacuum pump, high speed vacuum pump oil, vacuum pump inlet dust filter, vacuum pump exhaust port oil mist filter
Inert gas inflation interface, eutectic point tester
GMP clean room installation
Add: RM. 803, Chevalier House, 45-51, Chatham Road South, Tsim Sha Tsui, Kowloon, Hong Kong